Advanced Engineering UK Show 2018 - PRODUCT NEWS



Redware to sponsor Advanced Engineering's Automotive Engineering Forum

Redware are delighted to announce that we are Associate Sponsors of the Automotive Engineering Forum at Advanced Engineering 2018.

As part of the event, Redware's Business Development Manager Josh Bunyan will be exploring how industry disruption will affect the skills needs of automotive organisations across the value chain.

Josh said:
"As a company whose mission is to improve learning within automotive organisations, at Redware we believe it's important to contribute to knowledge-sharing across the automotive industry. We are therefore delighted to announce our sponsorship of this year's Automotive Engineering Forum."

Members of the Redware team will be available throughout the event to discuss how the rapidly changing automotive environment will impact on skills strategies in the coming years, and to explore how learning technology could help your organisation rise to the challenges presented by industry disruption.

Redware have 19 years' experience of developing bespoke learning technology for the automotive industry and can provide a free no-obligation consultation at the event to discuss how technology can better support your learning strategy.
How learning technology impacts your bottom line

Learning technology does not only improve Learning and Development results, but can improve business outcomes from improving productivity to increasing revenue. One of its key advantages is the ability to report on training interventions and incorporate this data into wider business reports to provide a more comprehensive view of your organisation's performance.
Redware customers have measured improvements including a 77% reduction in technicians' time to competence, an 18% reduction in staff turnover and a 64% increase in learner engagement. Organisations that report measurable improvements from learning innovation see an average 13% improvement in productivity, 19% increase in staff satisfaction and motivation, and 7% increase in revenue.

Learning innovation is also shown to improve agility, a vital organisational skill in the rapidly-changing automotive industry. For organisations to embrace disruption and create opportunities from change, the rate of learning within the organisation must be faster than the rate of change.

To find out more, speak to the Redware team at the Automotive Engineering Forum at Advanced Engineering from 31st October to 1st November 2018.

To find out more about Advanced Engineering 2018, visit https://www.easyfairs.com/advanced-engineering-2018/advanced-engineering-2018/ .


Modular MES Software for industry 4.0

Infodream specialize in manufacturing quality control and our innovative solutions have helped companies achieve manufacturing excellence for almost three decades.


Our modular suite caters for both SME's beginning their SMART factory journey looking to create a paperless workshop through to large industrial groups implementing fully connected multi-site applications.

Key functions of our solution include:
* Work order management
* Electronic job card and work instructions
* Shopfloor data collection and traceability
* Real time SPC and statistical analysis
* Web portal for enterprise visibility and KPI management
We will be show casing the latest features of Qual@xy Suite at stand N34. Please pop over for a demonstration and a friendly chat about the next steps of your 4.0 journey.

To find out more about Advanced Engineering 2018, visit https://www.easyfairs.com/advanced-engineering-2018/advanced-engineering-2018/ from 31st October- 2nd November.


MSP promote full automation at Advanced Engineering 2018

For the eighth consecutive year, metrology software products ltd (MSP) are exhibiting at Advanced Engineering, taking place from the 31st of October to the 1st of November 2018.

Automate your machine shop

At the NEC based event, MSP will show visiting manufacturers how to fully automate their machine shop; specifically their tool axis setting, their machine checking and their part setup.

Leading experts in developing and implementing precision metrology software, MSP will present their innovative products and how they make automation easy. In particular, visitors have the opportunity to learn about NC-Checker, NC-PerfectPart and, MSP's new product, AutoClock. These award-winning products help companies manufacture 100% accurate parts in a reduced manufacturing time, cutting costs and scrap parts and making processes more efficient.

MSP's Commercial Director, Tony Brown, details how each product automates the machining process: "AutoClock automates the first stage - the probe calibration process. It provides fast, accurate and automated tool axis setting and takes seconds to automatically set the tool axis offset to microns. Most importantly, it enables the probe to complete the automatic calibration process without human intervention, removing errors and uncertainty."

He continues: "NC-Checker provides automatic 5-axis checking of the machine tool, analysing the machine's accuracy. It provides a comprehensive report, showing the manufacturer if their machine is capable of machining parts to tolerance or where the machine is under-performing.

"NC-PerfectPart solves problems created by poor condition of supply or part alignment on the machine tool. It measures the parts actual position on the machine and these measurements are used to calculate the part alignment. The machine controller is automatically updated to compensate for any discrepancy between the part location and the machining program. All errors due to misalignment are eliminated."

Make your probes useful
This year, MSP are also aiming to demonstrate how their software can make probes more useful.

Machine tool probes are important tools for improving part quality during the manufacturing process. Yet they often remain unused, or limited to simple setup jobs, where they are unable to reach their full potential to increase part quality or setup speed.

With MSP's software however, machine tool probes are powerful; providing a wealth of benefits such as machine capability, stock condition of supply, part distortion, part alignment, increased part quality and post-machining inspection.

A year of firsts
This is the first year AutoClock is being shown at Advanced Engineering. It is the first product available to the industry which automates the process for tool axis setting, making it an exciting feature for the exhibition.

Peter Hammond, MSP's Technical Director, spoke ahead of the event: "We have exhibited at Advanced Engineering many times and visiting manufacturers are always impressed with the level of automation we can provide for their machine shops. I am looking forward to this year as we are able to offer another stage of automation with AutoClock, helping manufacturers to become even more efficient, productive and profitable."

It is also the first show for MSP's new Technical Account Manager, Keith Langford: "Advanced Engineering is a great opportunity to gain vital insight into emerging trends within all areas of the industry. I look forward to meeting with new and existing customers and learning about exciting new projects MSP can assist with."

As part of the company's marketing strategy for 2018, MSP launched a new website at the beginning of the year to improve overall user experience. Further additions will be made in time for Advanced Engineering and will offer a dedicated online support area for existing customers to access answers to the most commonly asked questions. Margaret Toberty, Director of Operations at MSP, explains: "We are always asking customers for feedback on our products and services. Many of our customers commented that it would be beneficial to have an online support tool with hints and tips to maximise using our software. We hope that the new support section of our website will be greatly received by all of our customers."

The event
Now in its tenth year, Advanced Engineering is the UK's largest gathering of advanced engineering professionals, connecting the entire supply chain of the UK's advanced engineering industry. The show has six zones dedicated to each area of the industry: Aero Engineering, Composites Engineering, Automotive Engineering, Performance Metals Engineering, Connected Manufacturing and - new for 2018 - Nuclear Engineering.

MSP will be available to answer any of your manufacturing questions at stand Q10. Unable to make the show? Visit www.metsoftpro.com, call +44 (0)1665 608193 or email info@metsoftpro.com for more information about MSP's products and how they could help your processes.

To find out more about Advanced Engineering 2018, visit https://www.easyfairs.com/advanced-engineering-2018/advanced-engineering-2018/ from 31st October- 2nd November.




Thermotron to Display Their 8800 Controller

Environmental & Vibration Testing Equipment Manufacturer Designs and Displays Intuitive Controller

Holland, MI: Thermotron, an environmental and vibration testing equipment manufacturer will be attending the 2018 Advanced Engineering trade show. Thermotron will have their streamlined 8800 Controller on display for attendees.

Through user-focused engineering, Thermotron has developed the 8800 Controller to monitor and record environment and vibration testing data. Built on 12" color touchscreen, data collection and operation are easy and reliable with a Windows®-based interface to give the controller a familiar look and feel. As a truly paperless recorder, the 8800 Controller stores 10-plus years of data with Ethernet and web-enabled capabilities for access anytime, anywhere.

Developed with the user in mind, the 8800 Controller supports robust operations with an intuitive interface. USB ports are ergonomically located near the front for quick data transfers, while the multi-level, password-based system protects your data. Available for retrofitting to older chambers, the 8800 Controller is available on the SE-Series, AGREE Chambers, Walk-In Chambers and custom product lines.

Thermotron environmental and vibration equipment is used in a multitude of industries. We service aeronautics, automotive, space fields, and more. Through testing equipment, Thermotron products simulate nearly any environment found on Earth and in space. Accurately testing materials increases quality, instills trust in the material, and provides confidence in reaching company goals.

Thermotron representatives will be in the Aero Engineering section, at space N23 to answer any questions and present the 8800 Controller.

For more than 55 years, Thermotron has been a leader and premier manufacturer of environmental test equipment. We've worked to establish a trusted reputation among our peers. When people hear the name Thermotron, they have confidence in the testing of their own product. We've been building our name since 1962; now it's your turn.

The Advanced Engineering Show runs from the 31st October until the 2nd November. To find out more about Advanced Engineering 2018, visit https://www.easyfairs.com/advanced-engineering-2018/advanced-engineering-2018/ .


Pryor to showcase solutions for identifying and traceability at Advanced Engineering 2018 - Stand CM36

World leading marking, identification and traceability specialist Pryor Marking Technology will be showcasing its comprehensive range of solutions for identification and traceability at Advanced Engineering 2018 - Stand CM36, Connected Manufacturing zone.

At this year's Advanced Engineering exhibition, visitors will have the opportunity to experience first-hand Pryor's extensive range of industrial marking, identification and?traceability equipment and software.

On show will be Pryor's laser marking machine, this incorporates high speed, on-the-fly laser marking and vision control, while producing a clean, smooth finish. This enables permanent laser marking and verification of components on high speed conveyors, in as little as 0.5 seconds. Visitors to the stand can see the on-the-fly laser marking in action and will receive a personalised pen to take away with them.

In addition, Pryor will be showcasing its range of dot peen marking equipment, both portable hand-held units and industrial bench-top. Dot peen can mark a wide range of work pieces using a variety of different character styles, sizes and depths. This method provides fast, accurate, low-stress marking and can mark through coatings or film on the material surface.

Pryor's team of experts will be on hand throughout the event to answer questions that visitors may have about traceability. They'll also be available to discuss the company's marking solutions and how they can ensure ultimate component traceability, process control and data capture.

Alastair Morris, Sales Director at Pryor, comments: "Advanced Engineering is the perfect exhibition for engineers from across industry to see, feel and experience the full capability of our solutions. We will have a range of machine demonstrations on the stand to showcase our unique part identification solutions."

This year's Advanced Engineering takes place on 31 October - 1 November at the National Exhibition Centre (NEC) in Birmingham, UK. Visitors to the show will find Pryor at Stand CM36.

Further information on Pryor and its marking, identification and traceability solutions is available at www.pryormarking.com.
The Advanced Engineering Show runs from the 31st October until the 2nd November. To find out more about Advanced Engineering 2018, visit https://www.easyfairs.com/advanced-engineering-2018/advanced-engineering-2018/ .




For more information on the Advanced Engineering 2018, or to register to secure your free ticket for the show, visit:
www.advancedengineeringuk.com




October 2018

Home - Search - Suppliers - Links - New Products - Catalogues - Magazines
Problem Page - Applications - How they work - Tech Tips - Training - Events