Bruel & Kjaer UK Ltd. - PRODUCT NEWS





Robot-controlled acoustic holography helps hearing aid development

Hearing aid manufacturers are constantly striving to improve speech intelligibility and comfortable listening, with researchers investigating computer-aided technology to design better hearing aids by improving sound transmission, reducing noise interference and feedback.

According to Poul Kristensen, Senior Acoustic Engineer at GN ReSound: “The big challenge in hearing aids is to have high gain and to have that, you need to be able to control your feedback. It’s a very small device for gain that is sometimes up to 80 dB, so you need many different tools to understand the feedback patterns.”

In hearing aids there are different vibration-borne feedback patterns, meaning the small speaker inside generates high pressure sound that makes the whole device vibrate. This vibration generates sound and if the sound path from the speaker to the output is not insulated you can also have direct sound feedback. For development prototypes this is especially important.

GN ReSound looked for a solution that could provide accurate conformal mapping on the small scale that they were looking for - and do so automatically and unattended. Seeing a robotic system already made for another customer, by Brüel & Kjær’s Customised Project Department, was important to GN ReSound’s decision, as it demonstrated the effectiveness of the system in action.

“At the time we were looking for a system it was taking an unpredictable amount of time in Research and Design to get the device performance and gain that we were looking for, because the feedback pattern is so difficult to understand,” said Poul Kristensen. “We had to do a lot of experiments without seeing the whole picture, so it took us a long time and the time taken wasn’t predictable. We wanted to get into a situation where things were more predictable, with a better understanding, so we could be more professional with better tools. This was one of the tools to build up our simulation models and understanding.”

GN ReSound preferred a robotic solution for the accuracy and repeatability that it could offer. They chose a turnkey solution from Brüel & Kjær using Statistically Optimised Near-field Acoustic Holography (SONAH) made by the Customised Project Department.

The full case study is available to read on: www.bksv.com


About Bruel & Kjaer
Brüel & Kjær is a world-leading manufacturer and supplier of sound and vibration solutions for use in a wide range of applications including environmental noise measurements, building acoustics, vibration measurements and quality control for use in the automotive, aerospace and consumer industries, as well as by local authorities. Today Brüel & Kjær has 900 employees and sales offices in 55 countries. Brüel & Kjær is a subsidiary of UK-based Spectris plc. (www.spectris.com). Spectris has annual sales of approximately £656m and employs around 6000 people worldwide in its 15 business units.
For more information, please contact :-

Bruel & Kjaer UK Ltd.
Jarman Way, Royston, Herts. SG8 5BQ. UK
Tel: +44(0) 1763 255 780
Fax: +44(0) 1763 255 789
E-mail:
ukinfo@bksv.com
Website: www.bksv.co.uk

July 2013

Home - Website - Search - Suppliers - Links - New Products - Catalogues - Magazines
Problem Page - Applications - How they work - Tech Tips - Training - Events