Dimetix AG - PRODUCT NEWS
       


DLS-B – Distance Laser Sensor 500m / ±1.5mm – New features

With our Laser-Distance Sensors DLS-B you measure absolute distances up to 500 meters with an accuracy of 1.5mm. The measuring device is even at extreme environment temperatures as low as -40 °C a cost efficient solution. Serial, analog and digital interfaces are standard features for the complete DLS-B product line.

Many new applications are now possible because of the following new features.

* Measuring range up to 500m
* Direct connectivity to an external display via RS232/RS422
* Output value calculation by adding an offset and gain
* External trigger for distance measuring

Direct connectivity of an external display via RS232/RS422
The DLS-B formats the measured distance as an ASCII string, which is understood by external displays with a serial interface. Therefore measurement results can be displayed using an external display without an additional controller.

Output value calculation by adding an offset and gain
The DLS-B is able to add an offset (positive or negative) to the measured value and multiply the sum with a gain factor. This gain factor is defined by a numerator (Num) and a denominator (Den) for maximum flexibility.

External trigger for distance measuring
The distance measuring action might be activated by an external signal on the digital input of the DLS-B.
____________________________________________________

June 2007

Home - Website - Search - Suppliers - Links - New Products - Catalogues - Magazines
Problem Page - Applications - How they work - Tech Tips - Training - Events