Industrial Mini PC Box supports all
Compact Board Series.
The AEC-6100 Industrial Mini PC Box is an ideal housing
unit for system integration using any compact card from
AAEON's PC line of compact single board computers.
The AEC-6100 special size of 7.5"(L) x 8.5"(W) x 2.5"(H) gives end
users flexibility in movement and placement. In the rear of the chassis,
you will find most of your application adapters such as 4 RS-232 ports,
1 Parallel port, and 4 USB ports. There are also two connectors for
P/S 2 (mouse & keyboard), Ethernet, 3 LED indicators, 1 reset button,
MIC_in, Line_in, and Line_out.
During the initial designing stages of the Mini PC Box, placement of
the internal devices was crucial. An exterior air inlet was designed
into the roof of the Mini PC Box to reduce overheating. In the front
of the Mini PC Box, there is a slot for installing and retrieving a
compact flash card that will offer a larger memory bank.
The Mini PC Box is built to house a 2.5" hard drive, however, a floppy
disk or CD-ROM connection is also possible. Located on the side
of Mini PC Box is a removable panel, allowing the floppy drive or
CD-ROM cable easy entry to the computer board. The designers
kept the end users in mind at all times by offering three types of
power connections. Located next to the floppy drive slot, there
is a traditional power terminal. A power button is also designed
in an easy-to-reach area located next to the power terminal.
Priced competitively, the AEC-6100 is now available.
____________________________________________________
For more information please contact:
Impulse Corporation Limited
Tel : +44(0) 1543 466552
August 2001
For more details of this product...
email our HelpDesk quoting Ref. shown below
Ref: Impulse005
