New Force Measurement Sensors
for Press-Fit Processes.
The new ready-to-install piezoelectric force sensors
complement the existing range of compression and
tension elements, and optimize force measurement
in press-fit processes with regard to price, simple
adaptation, measuring range and compactness.
Each of the three compact force sensors - Types 9333,
9343 and 9363 with measuring ranges of 50 kN, 70 kN
and 120 kN - is supplied with three 100%, 10% and
1% measuring range calibrations.
There are flanges on the top and bottom of the press force
sensor that enable them to be easily and flexibly installed
directly in push rods, punches or rams. Very low,
space-saving direct installation is achieved through
one-sided mounting by means of four internal precision
threads or by using the hexagon slot screw with threaded
insert supplied. If direct installation is not possible, the
sensors can be fitted using a standard or custom adapter.
High-precision coaxial installation, such as in push rods,
is possible using a double-sided centering seat. The sensor
has a central hole which enables it to be used in combination
with ejection tools.
The lateral cable outlet is protected with a screw-on connector
cap and is part of the accessories included. SCS calibration
and calibration of additional measuring ranges are available
as optional extras.
For more information, please contact :-
Kistler Instruments Ltd.
13 Murrell Green Business Park, London Road, Hook RG27 9GR
Tel: +44 (0)1256 741550
Fax: +44 (0)1256 741551