Kistler Instruments Ltd. - PRODUCT NEWS





Success Story

Kistler sponsors leading British Formula Student team. Team Bath Racing relies on compact and reliable pressure and temperature sensors


Inspiring young technology enthusiasts to pursue careers in engineering is one of the driv-ing forces behind Kistler’s sponsorship of automotive events. The company supports a number of regional student teams that are participating in international technology tour-naments, including “F1 in schools” or “Formula Student” (FS). Kistler measurement tech-nology has also been used in a number of successful world record attempts, such as the fastest acceleration from 0 to 100 km/h in an electric vehicle by the Academic Motorsports Club Zurich (AMZ) which was founded by students at the Swiss Federal Institute of Techno-logy (ETH) Zurich. One of the most prestigious automotive engineering competitions at uni-versity level is Formula Student. In total, Kistler sponsors 16 Formula Student teams from all over the world.

Precise measurements are the top priority in vehicle tests, so test configurations and equipment have to meet demanding requirements. Back in 1959, Kistler began developing its groundbreaking piezoelectric measurement and sensor technology to capture data on pressure, force, torque and acceleration. Nowadays, holistic measurement and data acquisition solutions developed by this Swiss family-owned company are in operation across the globe.

Founded in 1981, Formula Student is Europe's most established educational motorsport competi-tion. Backed by industry leaders and high-profile engineers, the competition aims to support innova-tive young engineers and promote careers in engineering. Each team must design a race car from scratch as part of a design and business project that contributes to their academic degrees. Partici-pating students pitch their designs to experts at Silverstone, generating vital feedback that can help the teams improve their designs. In their final year of studies, the students can see their designs become reality as manufacturing of their race car commences. The teams then go on to compete against some of the best teams in the world at Formula Student events. The teams are assessed in six categories. Before being allowed to enter the dynamics competition, the judges subject each race car to a rigorous inspection process. This final stage of the competition usually comprises 100 to 120 teams.

Kistler supports Team Bath Racing
Every year, “Team Bath Racing” (TBR) from the Somerset-based University of Bath designs and builds its very own single-seat, open wheeled race car for Formula Student competitions. The 2017 team is comprised of 21 ambitious final year engineering students. This year’s race car “TBR17” has a lot to prove: Team Bath Racing currently ranks as the top Formula Student team in the UK and the 6th out of 550 teams worldwide. In the past, TBR won the title of best team in the UK in 2007 to 2009 and 2015 to 2016.

Kistler has been sponsoring the Formula Student Team at the University of Bath since 2014. In 2017, Kistler provided the team with its 4080A family of M6 piezo-resistant absolute pressure sensors - the 4080A and the 4080AT. The precise sensors build upon the technology that is used to analyze the performance of the various powertrain subsystems. Type 4080AT, with a temperature probe and integrated signal conditioning, can be installed in the vehicle directly and provides reliable real-time data on pressure and temperature, for example in hydraulic, water or oil circuits for the early detection of problems or for monitoring critical operational condi-tions.


4080A sensor for brake pressure measurements
The team used the Kistler 4080A130 sensors to measure pressure in the front and rear sections of the braking system. This allowed them to develop a better understanding of the car’s brake bias. “In 2017, we wanted to extend our use of the Kistler 4080A130 sensors in the brake circuit by exploring a hydraulic brake-steer system. This required precise monitoring of pressure in each of the rear brake lines”, explains Pranav Vaswani, powertrain manager at Team Bath Racing. The race team was impressed by the 4080A sensor’s compact size and light weight, which facilitated the simple installation under the pedal assembly. The reduction in size from motorsport-standard M8 to M6 ports made it easier to work in confined spaces.

4080AT sensor for engine oil temperature and pressure measurements
The 4080AT020 sensor was predominantly used to monitor engine oil pressure in order to ensure the continuous lubrication of the engine. The inclusion of temperature measurement in the sensors was not only used to monitor the engine’s cooling performance, but also to control the radiators’ fans and the auxiliary water pump. Both pressure and temperature signals helped ensure the en-gine operated within the specified parameters and triggered alarms for the driver when the values exceeded the set limits. “Its small size was the reason why the Kistler sensor was used in the oil circuit since a bigger sensor would not fit in the space available. The temperature measurements of the 4080AT were very accurate with a good response rate”, says Vaswani. The dual measurement of temperature and pressure by the same sensor helped reduce wiring clutter around the car as well as the number and size of Autosport connectors. The integrated power and ground meant fewer connections and wires were needed in the wiring diagrams.

“Ready, Set, Go!” with Kistler sensors
The racing team praised the advantages of the sensors. The Kistler sensors 4080A and 4080AT are clear favorites due to their compact size and low weight. They are universally applicable and easy to install. By enabling measurements of temperature and pressure on one sensor, 4080AT even reduces the amount of cables in use.

“This year our car was enhanced by a high pressure hydraulic system for gear shifting. To ensure precise system control, we plan to use the compact 4080A250 sensors, one before and one after our hydraulic fluid filtration system. The pressure signals help control the pressure charging of the system accumulator. The inclusion of temperature sensing greatly reduces the design and manu-facturing effort required for the implementation of a well-engineered hydraulic system”, concludes Vaswani. “So far, we have had no issues with heat or shock. This is especially promising since the sensors have been subjected to significant vibrations (from a single cylinder engine) and tempera-tures of over 100°C, but still continue to monitor important car parameters. Furthermore, the media separating measuring element has prevented contamination issues”, explains Vaswani.

Kistler and the University of Bath have a long-lasting partnership in the field of engine development and have successfully competed in countless Formula Student competitions. “In 2017, we will do our best to defend our current position. We are confident we have the best possible equipment”, Vaswani sums up the rewarding relationship with Kistler.


About the Kistler Group
Kistler, the originator of piezoelectric measuring technology, is the global leader in dynamic pressure, force, torque and acceleration measurement. Cutting-edge technologies provide the basis for Kistler's modular sys-tems and services.
Customers in industry, research and development benefit from Kistler's experience as a development partner, enabling them to optimize their products and processes so as to secure sustainable competitive edge. This owner-managed Swiss corporation plays a key part in the evolution of automobile production and industrial automation, and its innovative sensor technology also helps foster the development of many newly emerging sectors. Drawing on our extensive application expertise, and always with an absolute commitment to quality, Kistler drives innovations ahead in lightweight construction, vehicle safety, emis-sion reduction and Industry 4.0.
Some 1,600 employees at 56 facilities across the globe are dedicated to the development of new measurement solutions, and they offer individual application-specific support at the local level. Ever since it was founded in 1959, the Kistler Group has grown hand-in-hand with its customers and in 2016, it posted sales of CHF 358 million. About 10% of this figure is reinvested in innovation and research – with the aim of delivering better results for every customer.



For more information, please contact :-

Kistler Instruments Ltd.
13 Murrell Green Business Park, London Road, Hook RG27 9GR
Tel: +44 (0)1256 741550
Fax: +44 (0)1256 741551
Email:
sales.uk@Kistler.com
Website: http://www.kistler.com

August 2017

Home - Search - Suppliers - Links - New Products - Catalogues - Magazines
Problem Page - Applications - How they work - Tech Tips - Training - Events