Draw-wire Displacement Transducer.
Measure round corners with RDP’s draw-wire
displacement transducer
Accurately measuring the displacement from a fixed point couldn’t
be easier than with the DWT transducer from RDP Electronics Ltd.
Based on the draw-wire principle, the DWT transducer body is
simply bolted to the point of reference and the draw wire extended
and attached to the moving part of the system. Measurements can
be made point-to-point or round corners. The plastic-coated draw
wire can measure displacements from a maximum of 600mm up
to 3.5m with a high degree of accuracy, and special versions are
available for measurement ranges up to 100mm or 7.5m.
DWT is available in two housing designs; standard for general
internal use and a sealed housing offering a greater degree of
environmental protection. The transducers also offer a variety of
outputs including 4-20mA, 0-10Vdc. An LCD display is available
as an option.
_____________________________________________
For more information, please contact :-
RDP Electronics Limited
Grove Street, Heath Town, Wolverhampton WV10 0PY. UK.
Tel: +44(0) 1902 457512. Fax: +44(0) 1902 452000
E-mail: sales@rdpe.com
Website: www. rdpe.com
January 2003
