RDP’s draw-wire displacement transducer
even measures round corners.
Accurately measuring the displacement from a fixed
point couldn’t be easier than with the DWT transducer
from RDP Electronics Ltd. Using a draw-wire principle,
the DWT transducer body is simply bolted to the point
of reference allowing the plastic-coated draw wire to
be extended and attached to the moving part of the
system.
Measurements can be made point-to-point or even around
corners for displacements from a maximum of 600mm up to
3.5m, all combined with a high degree of accuracy. Special
versions are available for measurement ranges up to 100mm
or 7.5m.
DWT is available in two designs of housing, with a standard
version for general internal use and a sealed housing where
a greater degree of environmental protection is called for.
The transducers also offer a variety of outputs including 4-20mA,
0-10Vdc. With an LCD display available as an option.
_____________________________________________
For more information, please contact :-
RDP Electronics Limited
Grove Street, Heath Town, Wolverhampton WV10 0PY. UK.
Tel: +44(0) 1902 457512. Fax: +44(0) 1902 452000
E-mail: sales@rdpe.com
Website: www. rdpe.com
May 2004
